-
-
FHD-125 High Speed Punching Machine
200 Ton Portal Type High Speed Punching Machine
Model No. | FHD-125 | ||
Stroke: | 【Slide Stroke】 | 20/30 | mm |
Capacity: | 【Normal Pressure】 | 125 | ton |
Die height: | 【Max. Die height】 | 400/400 | mm |
Speed per minute | 【S.P.M】 | 150-450/150-400 | Times/min |
Bolster Area: | 【Bolster size】 | 1400x850 | mm |
Slide Area: | 【Working table size】 | 1400x600 | mm |
Side Adjustment: | 【Die-height Adjustment】 | 50 | mm |
Bed opening: | 【Blanking hole】 | 1100x180 | mm |
Motor: | 【Main Motor】 | 30 | HP |
Gross Weight: | 25000 Kg | Dimensions : | 338x249x200 mm |
◎ By using 4 or 6 round pillars structure, can minimize the dynamic friction. Therefore, in the case of continuous operation for a long time, the heat generation is very tiny to ensure the accuracy of the press, and to prevent damage to the mold, extend the life of the mold.
◎ The machine Body is made of excellent tensile strength cast iron alloy with excellent shock-absorbing properties, which passed the testing of the national quality inspection department, even at high speed stamping and high speed feeding, the body is still calm with small vibration, can ensure the long-term accuracy of the machine.
◎ There are both manual and electric way to adjust the mold height, so it's easy to operate.
◎ The unique homeostasis design, which can balance the crankshaft vibration during high-speed operation of the slider produced, control the lower dead point accuracy.
◎ All bearing are imported from Japan with precise properties, precision, long life, effective in ensuring good performance of the machine.